There is an apparent change to squelch circuit operation if the VFO or Memory Channel has the channel step set to 5kHz. Further, it is observed that the PLL reference is temperature sensitive and this radio runs red hot up to 75 deg C case temperature. This combination of lack of temperature stability and narrow tolerance of off frequency signals with the channel step at 5kHz are incompatible. Given the widespread reports of these symptoms, I think that the measured results from my two units purchased 6 months apart are probably a strong indicator that Yaesu FTRs have a design fault that makes operation with a 5kHz channel step unreliable.
If a radio does not exhibit these symptoms, it is probably because it is not used with the channel step set to 5kHz. The good news is that if you are prepared to forgo 5kHz step operation, the problem will not be experienced. Rig Reference Ham Radio Equipment. Specs Manuals 0 Reviews 0 Prices 0 Compare. Login or Register to upload images. General characteristics HAM bands 2m 70cm Frequency stability?
Tuning steps? Receiver system? Image rejection? Audio output? Electrical Power requirements TX Max 9. We do our best to be accurate, but if you've spotted something wrong or incomplete, please let us know! Manuals, diagrams and brochures No documents available for this particular model.


Confirm. tamiya 60704 have hit
Следующая статья wilson juice
bloodborne castle
sometimes you die
zales 3 stone ring